10.6  
Key Programming 
 
The programmable function keys on certain telephones and key modules in the optiPoint 410, optiPoint 420, optiPoint 500, and the OpenStage range support double assignment (see the sections on the specific telephones in this chapter). Please note the following differences between the functions depending on the HiPath 3000 version:
 •   Up to and including V6.0 SMR-05:
Double assignment is possible if only phone numbers without LED support are saved on the first level. It is also possible to program call numbers without LED support on the second level. These can be internal station numbers, DID call numbers and call numbers from a HiPath network.
 •   V6.0 SMR-06 and later:
From the HiPath 3000/5000 Manager E (Settings menu: System Parameters (Flags)), one of the two following options can be set:
   -   The "Enhanced key functionality" flag is not activated (default setting).
This will produce the same behavior as in versions up to and including V6.0 SMR-05.
   -   The "Extended Key Functionality" flag is activated.
Once you have defined a key of your choice as the "Shift key", only phone numbers without LED support can be saved at the second key level which is now available. You can program any key functions on the first key level. LED signaling is associated with the first key level only.
When the Shift function is pressed, the LED associated with the Shift key lights up. This signals that the phone numbers on the second key level are available. When you switch key levels, the key labels on telephones with self-labeling keys also change.
The Shift function is deactivated when you press a phone number or if you press the Shift key again.
The optiPoint BLF function keys cannot have double assignments.

HiPath 3000/5000 V9, Service Documentation, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2012-06-25