2.1.4  
Design and Dimensions of the HiPath 3000 Systems 
 

2.1.4.1  
Design and Dimensions of HiPath 3800 

Two configurations  
Depending on the requirements, HiPath 3800 can be used as:
 •   a single-cabinet system (basic cabinet BC)
 •   a two-cabinet system (BC + expansion cabinet EC)

Design  
The basic cabinet BC has nine slots and the expansion cabinet EC has thirteen slots for peripheral boards. The common control board CBSAP has a fixed slot (slot 6, only in the BC).
Depending on your requirements, up to three LUNA2 power supply units can be used in the basic cabinet BC and up to four in the expansion cabinet EC.
The HiPath 3800 has various connection options for connecting the peripherals:
 •   SIVAPAC connectors are available on the backplane for connecting the external main distribution frame MDFU-E using CABLUs (prefabricated cabling units) or to connect external patch panels.
 •   Connector panels with RJ45 jacks for connecting the peripheral device directly. The connector panels are clipped onto the SIVAPAC connectors on the backplane.
 •   For U.S. only: connector panels with CHAMP jack for connecting the peripheral device directly. The connector panels are clipped onto the SIVAPAC connectors on the backplane.
 •   Connector panels with SIPAC 1 SU connectors for connecting the external main distribution frame MDFU-E or external patch panels using CABLUs. The connector panels are clipped onto the SIVAPAC connectors on the backplane.
The type of connection used will be decided in consultation with the customer on conclusion of the agreement. The cabinets will be delivered accordingly with or without clipped-on connector panels.

Two installation options  
HiPath 3800 is suitable for installation both as a standalone system and in a 19-inch cabinet.

Dimensions  
 Figure 2-1   HiPath 3800 Dimensions
 

2.1.4.2  
Design and Dimensions of HiPath 3550 

Design  
The housing intended for wall mounting (Figure 2-2) HiPath 3550 contains one shelf with six slot levels. The slot levels (shown in Figure 4-58), numbered in ascending order from the attachment side, have the following assignments:
 •   Slot levels 1-3: peripheral boards (two slots per level).
 •   Slot level 4: CBCC control board only.
 •   Slot level 5: SIPAC slot
 •   Slot level 6: optional boards (up to 5 modules)
The power supply is on the rear panel of the subrack.
The connection cables to the peripherals (telephones, trunk connections etc.) can be connected directly. Use an external MDFU in certain situations (CMI).

Dimensions  
 Figure 2-2   HiPath 3550 Dimensions
 

2.1.4.3  
Design and Dimensions of HiPath 3350 
Except for the CBCC board, the Octopus F100 communication system is identical in structure to HiPath 3350. The part number of this CBCC is: S30810-K2935-T401.  

Design  
The housing intended for wall mounting (Figure 2-3)HiPath 3350 contains one shelf with three slot levels. The slot levels (shown in Figure 4-61), numbered in ascending order from the attachment side, have the following assignments:
 •   Slot level 1: peripheral boards (two slots)
 •   Slot level 2: CBCC control board only.
 •   Slot level 3: optional boards (up to 5 modules)
The power supply is on the rear panel of the subrack.
The HiPath 3350 does not need an external main distribution frame. The connection cables to the peripherals (telephones, trunk connections etc.) are directly connected to the boards.

Dimensions  
 Figure 2-3   HiPath 3350 Dimensions
 

2.1.4.4  
Design and Dimensions of HiPath 3500 

Design  
The housing intended for use with 19-inch cabinets (Figure 2-4) HiPath 3500 contains four slot levels with the following assignments (represented in Figure 4-66):
 •   Slot levels 1-3: slide-in shelves for peripheral boards (2 boards can be plugged in on each level)
 •   Slot level 4: slide-in shelf for CBRC control board
 •   Slot level 5: optional boards (up to 3 modules)
The power supply is on the rear panel of the subrack.
Connection to the peripherals (telephones, trunk connections, etc.) is set up via RJ45 jacks on the board's front panel.

Dimensions  
 Figure 2-4   HiPath 3500 Dimensions
 

2.1.4.5  
Design and Dimensions of HiPath 3300 

Design  
The housing intended for use with 19-inch cabinets (Figure 2-5)HiPath 3300 contains three slots with the following assignments (represented in Figure 4-67):
 •   Slot level 1: slide-in shelves for two peripheral boards
 •   Slot level 2: slide-in shelf for CBRC control board
 •   Slot level 3: optional boards (up to 3 modules)
The power supply is on the rear panel of the subrack.
Connection to the peripherals (telephones, trunk connections, etc.) is set up via RJ45 jacks on the board's front panel.

Dimensions  
 Figure 2-5   HiPath 3300 Dimensions
 

HiPath 3000/5000 V9, Service Documentation, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2012-06-25