6.11.1  
Parameters for Call Data Export 
 
For HiPath 5000, you can forward the existing call data, for example, for external call charge calculation. The call data is forwarding in an ASCII file.
Proceed as follows to set the parameters for call data export:
 1.   Start the GetAccount Administration program.
    The following dialog appears.
   
 2.   Enter the following data:
   
Field name  
Meaning  
Mode  
Select the call data forwarding mode in this list field. The following modes are available:  
 •   None save call charge data
The call data is not written to the transfer file. Select this option.
 •   Save call charge data
The call data is written to the transfer file.
The modes Export calls with calculation and Export and save calls with calculation are intended for a future expansion.  
Transfer file  
Confirm the default file name (gcallserve) or enter a different file name.  
Transfer file folder  
Confirm the default folder name (C:\coldir) or enter a different folder name.  
The transfer file is stored in the folder set here.  
 3.   Click Save to save your inputs.
    The changes you made only become effective after the GetAccount service is restarted.
    The ASCII transfer file is automatically saved in the specified folder and extended to include the new call data. The file is extended by one line for each call data record. Each call data record (line) is ended with CR+LF.

Data record structure  

 Table 6-7   GetAccount - Data Record Structure
 No.  
 Pos.  
 Length  
 Description  
 1
 1-8
 8  
Date of call end
Format DD.MM.YY, for example "13.09.00"  
 2
 9-16
 8  
Time of call end
Format hh:mm:ss, for example "14:14:00"  
 3
 17-19
 3  
Trunk number  
right-aligned with leading blanks, for example " 1"  
 4
 20-22
 3  
Node ID for HiPath 3000 (matches the configuration in HiPath 3000/5000 Manager E)
right-aligned with leading blanks  
 5
 23-28
 6  
Internal extension number
right-aligned with leading blanks  
 6
 29-33
 5  
Call duration in seconds  
 7
 34-41
 8  
Call duration
Format hh:mm:ss, for example "00:04:34  
 8
 42-66
 25  
 •   For incoming calls: external caller number
 •   For outgoing calls: external call number dialed including the call-by-call number
left-aligned with succeeding blanks  
 9
 67-77
 11  
Number of tariff units
right-aligned with leading blanks  
 10
 78
 1  
Call type  
 •   1: incoming
 •   2: outgoing (default)
 11
 79-89
 11  
Account code ACCT
left-aligned with succeeding blanks  
 12
 90-100
 11  
MSN used  
 13
 101-105
 5  
Trunk
right-aligned with leading blanks  
 14
 106-109
 4  
LCR Selected Route (corresponds to configuration in HiPath 3000/5000 Manager E)
right-aligned with leading blanks  
 15
 110
 1  
CR  
 16
 111
 1  
LF  

Copying/renaming the transfer files  
Proceed as follows if you want to use the call information in the transfer file for external processing:
 •   Switch to the folder containing the transfer file (default:
C:\coldir).
 •   Rename the transfer file (default: gcallserve). The renamed file is now available for external processing.
 •   The transfer file is automatically recreated in the specified folder with the file name saved in the parameters and can be renamed again at a later point.
To avoid uncontrolled folder growth with the transfer file, an option is available for deleting the renamed transfer file after forwarding it for external use in this folder.  

HiPath 3000/5000 V9, Service Documentation, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2012-06-25