Table D-5

Nominal Output of the HiPath 3350 Power Supply Units

Power Supply Unit	Part Number	Max. Nominal Output in W
		5 V	-48 V
PSUP	S30122-K5658-M	15.0	19.2
UPSC-D	S30122-K5660-A300   S30122-K5660-M300	20.01	53.0
Powerbox PB3000 with LUNA2	S30177-U773-X with S30122-K7686-M1	-	110

1Nominal output = 40 W. Due to build-up of heat, not more than 20 W may be withdrawn.

You must check whether the total power requirement of the boards used and the workpoint clients connected exceeds the maximum possible output of the PSUP or the UPSC-D with or without Powerbox PB3000. Section D.7 "Checking Whether the Output of a Power Supply Unit is Sufficient" contains a sample calculation.

Table D-6

HiPath 3350 Board Power Requirement

Board or Component	Part Number	Net Power Requirement in W
		5 V	-48 V
BS3/1	S30807-H5482-X	-	2.0
BS3/3	S30807-H5485-X	-	3.0
CBCC (including subboards)	S30810-Q2935-A301	7.0	0.5
GEE12	S30817-Q951-Axxx	0.5	-
GEE16	S30817-Q951-Axxx	0.5	-
GEE50	S30817-Q951-Axxx	0.5	-
HXGS3 (in old systems incl. fan kit)	S30810-Q2943-X, S30810-Q2943-X1	10.0	2.8
IVMP8	S30122-Q7379-X100	2.6	0.3
P DM1	S30807-Q5692-X100	-	5.0
SLAD4	S30810-H2956-X100	2.0	1.0
SLAD8	S30810-H2956-X200	2.0	1.0
SLAD16	S30810-Q2957-X	2.5	1.51
SLU8	S30817-Q922-A301	0.8	-
STLS2	S30817-Q924-B313	0.6	-
STLS4	S30817-Q924-A313	1.0	-
STRB	S30817-Q932-A	0.5	-
TLA2	S30817-Q923-Bxxx	0.1	-
TLA4	S30817-Q923-Axxx	0.2	-
TLA8	S30817-Q926-Axxx	0.4	-
TMGL4	S30810-Q2918-X	4.72	0.12
TMQ4	S30810-Q2917-X	3.8	-
V24/1	S30807-Q6916-X100	0.3	-
4SLA	S30810-Q2923-X200	0.7	0.7
8SLA	S30810-Q2923-X100	1.3	1.3
16SLA	S30810-Q2923-X	2.5	2.5

1For each active (off hook) station, the net resource requirement increases by approximately 1.6W (dependent on the telephone's line length and DC resistance). 2Identified at a traffic flow of 0.8 Erlang