13.2  

Standards Supported 
 
HiPath 3000/5000 V9 supports the standards listed in the following table.

 Table 13-1   Standards Supported
 Standard  
 Transmission rate1  
 Notes  
G.711  
ITU standard for voice codecs  
64 Kbps  
ISDN voice quality  
G.722  
High-quality voice codec  
48, 56 or 64 Kbps  
Better voice quality than G.711  
G.723.1  
ITU standard for voice codecs  
5.3 or 6.3 Kbps  
Adequate voice quality  
G.729  
Group of ITU standards for voice codecs  
8 Kbps  
Less delay and better voice quality than G.723.1  
G.729A  
ITU standard for voice codecs, based on G.729  
8 Kbps  
Less delay and better voice quality than G.723.1  
G.729AB  
ITU standard for voice codecs, based on G.729A  
8 Kbps  
Less delay and better voice quality than G.723.1  
T.38  
ITU standard for fax transmission (Realtime FAX)  
14 Kbps  
Governs communication from group 3 fax devices over IP networks  
1The bandwidth actually required in the LAN, for example, may be considerably higher. Here are some relevant factors:
- Data Link Layer used: Ethernet (with or without VLAN), PPP, Frame Relay ...
- Protocols with/without compression: RTP, UDP, IP
- Security: VPN tunnel ...
- Redundancy: For example T.38
- Packaging: the number of samples that are transported per package.
"Clear Channel" transmission mode is characterized by the fact that signals are transmitted digitally and the connection is bit-transparent. There is no compression. The transmission rate is 64 Kbps.