3.3.43  
TMGL4R (for U.S. only) 
 
NOTE  
Danger of damage to property due to surge voltage. The required lightning protection measures must be taken for this board, see Section 2.1.2 "Lightning Protection".  

Introduction  
A TMGL4R trunk module connects up to four analog ground-start or loop-start trunks to HiPath 3500 and HiPath 3300.
Ground start is the default.

Interfaces  
 Figure 3-115   TMGL4R (for U.S. only) (S30810-K2918-Z)
 
If ANI4R is installed as option 1 or 2, TMGL4R board must be inserted in slot 4, 6 or 8 (slots 6 and 8 are not available with HiPath 3300).  

Contact assignment  

 Table 3-165   TMGL4R (for U.S. only) - Contact Assignment
 Port  
 X3 Pin
(To GEE)  
 X4 Pin
(To trunks 1-4)  
 X5 Pin
(To ANI4R)  
 Signal  
 1  
 3  
 12  
 3  
 b-wire (ring), trunk 1  
 2  
 13  
 2  
 a-wire (tip), trunk 1  
 2  
 5  
 22  
 5  
 b-wire (ring), trunk 2  
 4  
 23  
 4  
 a-wire (tip), trunk 2  
 3  
 7  
 32  
 7  
 b-wire (ring), trunk 3  
 6  
 33  
 6  
 a-wire (tip), trunk 3  
 4  
 9  
 42  
 9  
 b-wire (ring), trunk 4  
 8  
 43  
 8  
 a-wire (tip), trunk 4  
 -  
 10  
 -  
 10  
 Call charging module assignment (GMZ)  

HiPath 3000/5000 V9, Service Documentation, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2012-06-25