NOTE   Danger of damage to property due to surge voltage. The required lightning protection measures must be taken for this board, see Section 2.1.2 "Lightning Protection".

Figure 3-92

TM2LP - Front Panel (S30810-Q2159-Xxxx)

To ensure sufficient shielding, provide the board with a shielding panel. For information on mounting the shielding panel, see Section 4.1.5.3 "Inserting or Removing Boards".

Table 3-123

TM2LP - LED Statuses

Red LED	Green LED	Status	Action
Off	Off	Board not receiving power or not plugged in correctly.   Board is out of order.	Check plug contact on board.
On	Off	Board is receiving power and board test is in progress.   Board is defective if status remains unchanged (board test unsuccessful).	Replace board.
		Loadware loading not successfully completed. Board is faulty.	Replace board.
		Error detected on board.   Board is deactivated (not applicable to errors detected by test loops) or board was deactivated using HiPath 3000/5000 Manager E.	Check whether the board was deactivated using HiPath 3000/5000 Manager E. If not, replace board.
Flashing	Off	Loadware is being loaded.
Off	On	Board test completed successfully. Board is OK (idle state).
Off	Flashing	At least one subscriber line circuit is activated.

Table 3-124

TM2LP - SIVAPAC Connector Assignment on the Backplane

Pair	a-wire (tip)1	b-wire (ring)1	SIVAPAC connector	TM2LP		MDFU-E	Notes
1	wht/blu		1	1a	Port 1	1a
		blu/wht	23	1b		1b
2	wht/ora		3	2a	Port 2	2a
		ora/wht	4	2b		2b
3	wht/grn		5	3a	Port 3	3a
		grn/wht	6	3b		3b
4	wht/brn		7	4a	Port 4	4a
		brn/wht	8	4b		4b
5	wht/gry		9	5a	Port 5	5a
		gry/wht	10	5b		5b
6	red/blu		11	6a	Port 6	6a
		blu/red	12	6b		6b
7	red/ora		13	7a	Port 7	7a
		ora/red	14	7b		7b
8	red/grn		15	8a	Port 8	8a
		grn/red	16	8b		8b
9	red/brn		17		Free
		brn/red	18
10	red/gry		19		Free
		gry/red	20
11	blk/blu		24		Free
		blu/blk	25
12	blk/ora		26		Free
		ora/blk	27
13	blk/grn		29		Free
		grn/blk	30
14	blk/brn		31		Free
		brn/blk	32
15	blk/gry		34		Free
		gry/blk	35
16	yel/blu		37		Free
		blu/yel	38

1see "Abbreviations for colors" at the start of Section 3.3 "Peripheral boards".

Table 3-125

TM2LP - Connector Panel Assignment with RJ45 Jacks

RJ45 jack		TM2LP	Notes
No.	Pin
1	4	1a
	5	1b
2	4	2a
	5	2b
3	4	3a
	5	3b
4	4	4a
	5	4b
5	4	5a
	5	5b
6	4	6a
	5	6b
7	4	7a
	5	7b
8	4	8a
	5	8b
9	4		Free
	5
10	4		Free
	5
11	4		Free
	5
12	4		Free
	5
13	4		Free
	5
14	4		Free
	5
15	4		Free
	5
16	4		Free
	5
17	4		Free
	5
18	4		Free
	5
19	4		Free
	5
20	4		Free
	5
21	4		Free
	5
22	4		Free
	5
23	4		Free
	5
24	4		Free
	5

Table 3-126

TM2LP - Connector Panel Assignment with CHAMP Jack (for U.S. only)

CHAMP jack	TM2LP			Notes
1	1a	1 Ring	Port 1
26	1b	1 TIP
2	2a	2 Ring	Port 2
27	2b	2 TIP
3	3a	3 Ring	Port 3
28	3b	3 TIP
4	4a	4 Ring	Port 4
29	4b	4 TIP
5	5a	5 Ring	Port 5
30	5b	5 TIP
6	6a	6 Ring	Port 6
31	6b	6 TIP
7	7a	7 Ring	Port 7
32	7b	7 TIP
8	8a	8 Ring	Port 8
33	8b	8 TIP
9			Free
34
10			Free
35
11			Free
36
12			Free
37
13			Free
38
14			Free
39
15			Free
40
16			Free
41

Table 3-127

TM2LP - Connector Panel Assignment with SIPAC 1 SU Connectors (Cable for Ports 1 - 16)

Color Group	Pair	a-wire (tip)1	b-wire (ring)1	SU connector	TM2LP		MDFU-E	Patch Panel, MW8 pin	Notes
1	1	wht/blu		19	1a	Port 1	1a	4
			blu/wht	39	1b		1b	5
	2	wht/ora		38	2a	Port 2	2a	4
			ora/wht	48	2b		2b	5
	3	wht/grn		27	3a	Port 3	3a	4
			grn/wht	47	3b		3b	5
	4	wht/brn		16	4a	Port 4	4a	4
			brn/wht	46	4b		4b	5
	5	wht/gry		05	5a	Port 5	5a	4
			gry/wht	45	5b		5b	5
2	6	red/blu		14	6a	Port 6	6a	4
			blu/red	44	6b		6b	5
	7	red/ora		23	7a	Port 7	7a	4
			ora/red	43	7b		7b	5
	8	red/grn		32	8a	Port 8	8a	4
			grn/red	42	8b		8b	5
	9	red/brn		11		Free
			brn/red	31
	10	red/gry		02		Free
			gry/red	22
3	11	blk/blu		13		Free
			blu/blk	33
	12	blk/ora		04		Free
			ora/blk	24
	13	blk/grn		15		Free
			grn/blk	35
	14	blk/brn		06		Free
			brn/blk	26
	15	blk/gry		17		Free
			gry/blk	37
4	16	yel/blu		08		Free
			blu/yel	28

1see "Abbreviations for colors" at the start of Section 3.3 "Peripheral boards".