10.1.5 |
System |
| System allows status information for the communication system to be displayed, for example system-wide flags or the software version. |
10.1.5.1 |
Area: System-wide flags |
| These entries shows whether FWD to the ISDN CO is activated or deactivated. |
| The destination call number is also displayed if FWD is activated. |
| The night service status is also displayed. |
10.1.5.2 |
Area: Optional cards |
| Data from optional cards with a processor is displayed here (GEE12/16/50, STRB cards). An ALUM is not displayed here. |
| The data serves the identification of the options and the output status. |
| |
10.1.5.3 |
MSN or CFW status table |
| The Call forwarding to CO feature is organized into 3 types of call forwarding: |
| - | CFU Call Forwarding Unconditional This is unconditional, immediate call forwarding; all calls intended for an MSN are forwarded directly by the carrier, regardless of their status. |
| - | CFNR Call Forwarding No Reply Call forwarding to CO is implemented only when the incoming call is not answered within a given time (15 s). |
| - | CFB Call Forwarding Busy Call forwarding is implemented only if the selected MSN is busy. |
| All three types of call forwarding can be realized for any other external connection (ISDN network, analog network, radio telephone network, global). This service is always activated for the basic services "telephony", "speech" and " 3.1 kHz audio". |
| Only one forwarding destination can be entered per MSN and forwarding type. |
| Call forwarding can be activated/deactivated from any telephone to which an MSN is assigned and which has the authorization to initiate external call forwarding. The other MSN's are not affected by this call forwarding. If an MSN is assigned to a group, every station in the group can activate/deactivate the call forwarding. The destination call number of the call forwarding must be entered without trunk group code since the call forwarding is implemented in the central office. |
| There is a common procedure for all three types of call forwarding. In this procedure, the type of the call forwarding, the MSN to be forwarded and the forwarding destination must be entered. It is absolutely necessary to enter the MSN since a station can be assigned to several MSN's under group configuration. The activation of the feature can be initiated using expert codes, menus, or key functionality. |
| Call forwarding can be deactivated at any time, independently of the activation. |
| The Call forwarding to CO for each MSN feature is limited to 10 MSN's and is valid only for multi-device connections. |
| An activated CFU is signaled by a special dial tone and a display by which the stations assigned to the MSN. |
| For each MSN, the line where the call forwarding is to be activated is configured, since each MSN is given a basic connection. |
| The system status displays for which MSN, on which line and to which call number, a call forwarding to CO has been activated. In addition, the type of the call forwarding (CFU/CFNR/CFB) is displayed. |
10.1.5.4 |
Area: Software version |
| The software version and/or binder number of the communication system is displayed in this field. |
| The country version is also listed. See also HiPath 3000 Service Manual . |
10.1.5.5 |
Area: HW data |
| Hardware data from the communication system is displayed here. |
Serial no. = MAC addr |
| The MAC address of the LAN Interface Module (LIM) is displayed here). This MAC address is also simultaneously used as the unique serial number of the control board. This information is available only for HiPath 3000. |
|
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 7 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2012-06-25 |
