9.2.9  
HXG Configuration (V4.0 and Earlier) 
 


Settings | Set up station | HXGx Configuration
 
HXG Configuration is used to configure the station ports of the HG 1500 cards.

9.2.9.1  
Area: Selection 

HG 1500 Card  
The HG 1500 cards plugged into the communication system can be selected via HG 1500 Card.

9.2.9.2  
Stations table 
This table displays all station ports which are free in the communication system and which can be configured, as well as all configured station ports for this card.

Selected station, System Client, S0 Extension, Setup  
If System Client is selected, then all selected station ports are configured as system clients via Setup.
If S0 Station is selected, all selected station ports are configured as S0 stations via Setup.

Selected station, Delete  
All selected station ports are deleted by pressing Delete.

Configured station  
The system clients and S0 stations configured for the current HG1500 card are displayed in this field.

See also:  
   -   Section 9.4 "Settings | Lines/networking"
   -   Section 10.1.1 "Cards"
   -   Section 10.1.2 "Card Configuration | T1 Configuration"
   -   Section 10.1.3 "Card Configuration | Card data"
   -   Section 9.2.10 "Gatekeeper (V5.0 and Later)"
   -   Section 9.2.11 "Gateway (V5.0 and Later)"

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2012-06-25