12.1.1 Program options General

12.1.1	Program options General

Options | Program options | General

The General tab can be used to set the general program options for the HiPath 3000 Manager such as the user interface language. for example.

12.1.1.1

Area: Error Signaling

This feature allows you to monitor the alarm history in the communication system. If the option acoustic warning on is set, and an error signal is received, a warning beep is issued.

After the error message is received, the data is saved in the file that was configured in the Output file window (default name: errorsig.err).

Use the Browse button to define the name, type (the default is .err) and storage location of the error file.

12.1.1.2

Area: Automatic backup of CDB

These settings allow you to automatically save your customer database at regular intervals to the PC's hard drive. The Activated option can be used to activate the function. The length of the interval can be defined by typing a value in the Cycle field. The default setting is sixty minutes.

The database in the communication system is backed up daily at midnight to the Flash Memory Card. During a power failure, the current database is maintained for approximately 100 hours through an alternate power supply. Still, it is a good idea to make sure that you keep a copy of the latest version of your database on your PC.

You might also want to back up your database to a floppy disk. The Hicom 150 E Office Point, Hicom 150 E Office Com and HiPath 3300 to 3550 communication systems come with a place to store a back-up floppy.

12.1.1.3

Area: Select language

This feature allows you to determine which language is used for the HiPath 3000 Manager.

12.1.1.4

Area: Language conversion

The options Latin, Greek or Cyrillic define which character set should be used in the communication system for the texts to be loaded. The distinction is necessary because these three PC character sets overlap in the upper 128 bytes of the ASCII character set. By selecting the option Greek, for example, a Greek info text about HiPath 3000 Manager can be loaded into a communication system with Greek country code running under a Russian version of Windows.

When doing this, the destination character set may not match the PC character set used by the operating system (Windows 95, etc.). This means that the input characters cannot necessarily be displayed by the PC character set being used. This does not have any implications for the conversion tool used.

12.1.1.5

Area: HiPath Manager HG 1500

The installation directory of Manager I can be entered here. This enables Manager I to be called by simply double-clicking an HG 1500 card in the menu tree of HiPath 3000 Manager.

12.1.1.6

Area: Default H.323 client

All H.323 clients are initially assigned the default IP address entered under Default H.323 client.

As of HiPath 3000 V9, H.323 clients are no longer supported.

12.1.1.7

Area: Preset Redundancy Destination

During configuration, all workpoint clients are assigned a redundancy IP address that is entered under Preset Redundancy Destination.

Tip:

Under Settings | Set up station | Gatekeeper (V5.0 and Later), configure the system clients that should NOT support the Resilience Service Application (RSA) feature first as the redundancy IP address is set to 0.0.0.0 by default.

Then change the redundancy IP address and add the system clients that should support the Resilience Service Application (RSA) feature.

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 7		up

Disclaimer & Copyright	ID: P31003H3590M1000176A9	2012-06-25