14.3.4	Behavior of the Branch-Office IP Workpoint Clients in Emergency Mode

The following applies for the IP workpoint clients registered in an emergency with HiPath 3000 via SRS:

•	The features of HiPath 3000 are available.

•	The HiPath 3000 user interface is implemented in emergency mode.

•	This also applies to the key layout of the IP workpoint clients.

•	The IP workpoint clients have a preconfigured database in the HiPath 3000 system for emergency mode.

•	The functionality described is implemented in the standard system software.

•	No HiPath 3000 feature is restricted or blocked.

•	The system configuration must facilitate emergency mode. This means that stations, LCR, COS, etc., also require administration in this regard.

•	In emergency mode, the display of the IP workpoint client shows a corresponding message. The display of the message can be administered via HiPath 3000 Manager E.

•	In the HiPath 3000 system, preconfigured station numbers must be used for outgoing calls. This also applies to preconfigured COS entries.

•	The LCR feature must be administered in HiPath 3000 in such a way that internal calls within the private network are handled via TDM lines.

•	In emergency mode, calls can also be directed via preconfigured alternative LCR routes (e.g. for the operator).

•	Calls can also be traced in emergency mode.

•	There are no specific security requirements with regard to H.235 that deviate from the conditions generally valid for HiPath 3000 (HG 1500) and IP workpoint access.

HiPath 3000/5000 V9, Feature Description, Issue 7		up
Disclaimer & Copyright	ID: P31003H3590F100017618	2012-06-25