13.1.6  
Configurable CLIP 
 

Definition  
The call number specified here is transferred to the called telephone instead of the DID number and displayed on the device. The "Configurable CLIP" system-wide flag must be activated for this.
In an entry is not made in the CLIP column, the DID number is transferred.
Example: In the case of calls by hunt group members, only the hunt group number should be displayed on external devices. The hunt group number must therefore be specified in the CLIP column for all members. The internal call number is displayed within a system or network independent of the CLIP specification.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 Telephones with display
(optiPoint 500 and OpenStage TDM)  
Hardware requirements  
 Digital trunk connection  
Software requirements  
 V5.0 or later  
 V3.0 or later  
 V1.0 or later  
CO feature  
 x  
 x  
 x  
Station feature  
 x  
 x  
 x  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
CLIP/LIN  
CLIP and LIN (Location Identification Number; for U.S. only) are mutually exclusive. By default, LIN is activated for the U.S., and CLIP is activated for all other countries. If CLIP is activated for the USA, LIN is automatically disabled.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25