13.1.24  
Programming National and International Codes for Outgoing Calls 
 
Implementing features, see also Manager E Programming National and International codes for Outgoing Calls

Definition  
Depending on the origin, the caller's station number, including the trunk access code (0, for example), the national prefix (0, for example) or the international prefix (00, for example), appears in the optiPoint telephone display, the caller list, and dialing aids (such as Smartset).
Carriers are reached by dialing a separate national prefix (1 digit) or international prefix (2 digits). If a HiPath 3000/5000 system provides access to more than one carrier (separate port or shared port), it is not possible to determine the carrier from which incoming calls arrive.
To represent a prefix, this feature enables you to configure the national and international access codes (national and international prefixes). A number between 0 and 9 can be used as the values for the programmable digits.
This allows calls to be answered with the help of caller lists and Smartset even when carriers are used. The existing prefixes are also used for the carriers.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 S0 board  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  
CO feature  
 -  
 -  
 -  
Station feature  
 x  
 x  
 x  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
National or international prefix  
Only one national or international prefix exists for the entire system. The programmed prefix (and the carrier codes) can be up to 2 digits long.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25