12.4  
Call Detail Recording at Station (CDRS) (not for U.S.) 
 

Definition  
 •   Every optiPoint, OpenStage, a/b, S0 (or MSN), and cordless telephone in the system has two storage devices:
   -   A call charge summation memory (call detail memory)
At the end of an external call, the system adds the final charges to the charges already stored in the call detail memory on the station. Users of stations with a display (optiPoint, OpenStage) can display their current charges by entering a code.
   -   An individual call memory
The system adds up the charges incurred during a call in this memory, even if the call consists of individual call segments, as in the case of the toggle feature. At the beginning of a new call, the individual call memory is reset to 0.
    The contents of the individual call memory appear first. A short time later, the contents of the cumulative call charge memory are displayed.
 •   You can use the system telephone (phone with programming authorization) as a charge display station. The user of this station can use the system administration to:
   -   Display the cumulative call charge memory for one station.
   -   Display the cumulative call charge memory for all stations (organized by station numbers).
   -   Reset the cumulative call charge memory for a specific station.
Call charge pulses are converted to monetary amounts on the basis of the call charge factor defined as a currency amount (including any extra charges that may apply) per call charge unit or pulse (refer to Section 12.10 "Call-Charge Display With Currency (not for U.S.)").
From the system telephone, you can print the latest CDRS data on a printer connected to the V.24 interface, thereby printing the cumulative call charges for all stations connected to the system.

GET Data Output via LAN Interface  
You can transfer CDRS data to external applications via the LAN interface (Ethernet).

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 Loop start:  
 Telephones with display (optiPoint, OpenStage)  
 Loop start:  
 GEE12/16/50;  
 Telephones with display (optiPoint, OpenStage)  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  
General requirements  
 Call details from the public network  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25