5.3.5  
Trunk Seizure Type and Simplified Dialing 
 
Implementing features, see also Manager E Trunk Seizure Type and Simplified Dialing

Definition  
HiPath 3000/5000 systems permit trunk seizure via the trunk keys or call keys on an optiPoint or OpenStage telephone.
Trunk seizure is also possible from any telephone using the trunk or trunk group codes. To seize the second trunk using a trunk or call key, Prime Line must be active and a second trunk group assigned.
Trunk seizure via trunk group code is not possible by entering the trunk group code and pressing the trunk group key.
When the system receives a seizure request, it searches for an available trunk in the trunk group. If a trunk is available, it is seized.
Prime Line (Simplified dialing)
The Simplified Dialing feature is a system-wide feature that allows users to dial directly to external destinations without the use of Trunk or Trunk Group keys. The external access code is automatically dialed by the system. Only one outgoing Trunk Group is possible with this arrangement. To dial internal stations, the user must first press the Internal key and dial the station number.
When this feature is NOT active in the system, the reverse operation is true; that is, internal stations can be dialed directly, while outside connections require a trunk, trunk group key or an access code.
In the case of systems equipped with simplified dialing (Prime Line), the following applies:
 •   The function key preset for call forwarding on OpenStage stations cannot be programmed with an internal forward destination. As a result of the simplified dialing, the system interprets this as forwarding to the exchange. For call forwarding to an internal forward destination, a freely-programmable touch/sensor key should be used.
 •   Internal station numbers in the missed calls list on OpenStage stations are handled in the same way as external station numbers.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 Trunk connection  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Lines  
You must use system administration to cancel nonexistent or physically disconnected trunks.  
COS changeover  
If you activate a telephone lock, you cannot seize a trunk.  
Entrance telephone  
You cannot seize a trunk from an entrance telephone.  
Hold/park  
An undialed or partially dialed trunk cannot be parked or placed on hold.  
Prime Line (Simplified dialing)  
optiPoint 500 and OpenStage 20 telephones cannot use this feature.  
Prime Line (Simplified dialing)  
With automatic line seizure, you can program trunks in different trunk groups. You cannot define an overflow from trunk group 1 to another trunk group.  
CSTA  
The "Simplified dialing" feature is not supported by CSTA.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25