5.2.13  
Analog Direct Inward Dialing with MFC-R2 
 
Implementing features, see also Manager E Analog direct Inward Dialing MFC-R2

Definition  
An MFC-R2 trunk is an analog trunk interface for direct inward dialing that allows external callers to reach extensions directly without the assistance of an attendant.
The system supports MFC-R2 (SMFC) as the default setting, MFC-R2 with caller ID, tone dialing, and dial pulsing. It is not possible to use tone dialing and MFC-R2 (with or without caller ID) simultaneously.
To implement the CLIP feature for incoming calls, you can enter the calling party number when MCF-R2 (SMFC) is active. When receiving calls for which the trunk supplies this information, the calling party's number appears on the screen of the called party's telephone.
This feature must be configured for each trunk (signaling method parameter set to MFC-R2 with caller ID).

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 -  
Hardware requirements  
 TMAMF  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.2 or later  
 -  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Analog direct inward dialing with MFC-R2  
Available in Brazil, India, Malaysia, Singapore and ATEA countries only. This setting is ignored in all other countries.  
The ATEA countries listed below require country initialization with the international country code = 21. In addition, parameter PAR_05 (System status - System-wide - Boards: MFC/R2 table) must be set in HiPath 3000/5000 Manager E expert mode.  
 •   Egypt = 05h (default)
 •   Nigeria = 06h
 •   Oman = 07h
 •   Saudi Arabia = 08h
 •   Syria = 09h
 •   Tunesia = 0Ah
 •   United Arab Emirates = 0Bh
Caller ID  
Displayed exactly as received from the trunk. The system does not add any digits (such as trunk access codes or discriminating digits) or remove any digits (such as the local area code supplied by the central office). Likewise, the displayed station number cannot be redialed directly and does not appear in the caller list.  
Caller ID  
Not available in Singapore.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25