5.2.11  
Collect Call Barring per Trunk (for Brazil only) 
 
Implementing features, see also Manager E Collect Call Barring per Trunk

Definition  
This feature provides for automatic release of incoming collect calls; users can configure it individually for each analog trunk (loop start). If this feature is enabled for a trunk, the system opens the loop for two seconds (default value) one second (default value) after an incoming call is accepted. This ensures that collect calls are released in the network, while other calls continue unaffected.
Not all providers guarantee that the called party will receive the information element for identifying a collect call in the ISDN-D-channel protocol. Call collect barring is not possible in this case.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 -  
Hardware requirements  
 Analog trunk (loop start)  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 -  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Collect call barring per trunk  
Only available in Brazil. This setting is ignored in all other countries.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25