3.2.6  
Mobile PIN (FlexCall) 
 
Implementing features, see also Manager E Mobile PIN

Definition  
This feature allows a user (active station) to conduct internal or trunk calls (flex calls) from a remote telephone (passive station) using his or her own user profile (station number, name, toll restriction, call detail recording). The call detail data (CDRC/CDRS) is assigned to the active station.
To activate this feature, perform one of the following steps on the remote terminal:
 •   Enter "Mobile PIN (FlexCall)" code + local station number + PIN
 •   Call service menu + enter local station number + enter PIN
 •   Press the programmed key + enter local station number + enter PIN
The feature remains activated until the active station terminates the call.
As long as this feature is activated, the current telephone (passive station) cannot be reached under its actual station number. Do not disturb is activated.
An active station can be a:
 •   Stations
 •   MULAP (in this case, the PIN of the primary station in the MULAP group is requested)
An active station cannot be a:
 •   Hunt group
 •   ACD group

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Services  
This feature supports only the voice service.  
Call detail data  
Call detail data (CDRC/CDRS) is assigned to the station number of the active station.
If the active station is the primary station in a MULAP group, call charges are recorded just as though the MULAP primary station had placed the call.  
Recall  
A recall is signaled on the passive station telephone but is no longer part of the flex call. For this reason, it is conducted using the profile of the passive station (number, name and classes of service).  
Busy indication  
Busy indication applies to the passive station telephone. Only the trunk of the active station is signaled as busy.  
Features that can be used after flex call is activated  
 •   Speaker call (paging)
 •   Conference
 •   Busy override (busy override class of service taken from active station)
 •   Toggle
 •   Parking
 •   Consultation hold
 •   Transfer
 •   Call pickup (during a flex call, calls are picked up using the profile of the active station)
 •   Do not disturb (DND)
 •   Call forwarding (CF)
 •   Send message (message waiting)
 •   Callback (The callback is signaled at the telephone of the passive station.)
 •   Station number suppression
 •   Group ringing
Internet telephony  
This feature may not be used by SIP telephones.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25