10.5.3  
Schedule 
 


Settings | Least Cost Routing | Schedule
 
A schedule (with up to 8 time slots per day) may be configured for controlling the LCR. You can configure these time slots for every day of the week. The first time slot of any given day begins at 00:00 and ends with the entry in the time limit. A time zone is assigned to each time slot. The next time slot begins when the previous one ends.
Example for a time plan:

Monday  
 12:30 A  
 16:45 B  
 23:59 A  
 ---  
 ---  
Tuesday  
 23:59 A  
  ---  
  ---  
 ---  
 ---  
:  
   
   
   
   
   
Sunday  
 23:59 A  
  ---  
  ---  
 ---  
 ---  
Selection of the route is unsuccessful if the time zone in the route table in the dial plan does not match the time zone of the current time slot.

10.5.3.1  
Schedule table 
Time slots can be entered into the schedule by "drawing" them with a mouse or via a dialog box. If the maximum number of time slots allowed is exceed for a given day, the time slots are not created.
To "draw" a time slot in the schedule, first mark an area in the schedule and then select a time zone by clicking on one of the buttons (A-H) to the right of the schedule.
To insert a time slot via a dialog, double-click on the area in the schedule where the time slot is to be inserted. A dialog box in which you can enter the start and end time and select the time zone is displayed.
Existing time slots - even across multiple days - can be marked and moved to another position in the schedule (if possible). If moving an area results in the creation of an undefined gap, the preceding time slot is extended accordingly.

10.5.3.2  
Context menu 

Copy
Paste  
Existing time frames - even over multiple days - can be marked and then copied. To do this, simply mark the desired area and select Copyfrom the context menu. The copied area can then be inserted (pasted) at the current position by using the Paste function. Instead of using the context menu to copy and paste, you can also use the standard keyboard shortcuts Ctrl+C and Ctrl+V, respectively.  
Copy to all weekdays  
The copied area is copied to all weekdays. If the time slots cannot be copied for any particular day (because other time slots already exist, for example), then that day is omitted.  
Delete this weekday  
All time slots of the marked weekday are deleted.  
Clear all  
The entire schedule is deleted.  
Set resolution  
Defines the chronological resolution (units of 1, 15, 30 or 60 minutes).  
A-H  
Sets a time zone.  

See also:  
   -   Section 10.6 "Settings | Incoming calls"
   -   Section 10.5.2 "Dial plan"

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03