9.19.38  
Transfer | Callback connection 
 


File | Transfer | Callback connection
 
The Callback connection dialog allows you to enter numbers for the callback feature configured under Transfer | Communication.

9.19.38.1  
Area: Callback connection 
In the fields, you can configure callback numbers associated with the callback passwords. The first callback number is also used as a destination for automatic error signaling. Up to six numbers can be entered.

Via X75  
If the Via X75 option is activated for a specific number, call setup is implemented via the second ELIC (B-channel). Otherwise, the call setup is implemented via the communication system IMOD.
In the U.S., the Via X75 option should not be activated. The only tested and supported connection is via an analog modem (IMOD).  

Error Signaling "On"  
This option is used to turn on error signaling. It is only when this option is activated that class B errors are sent from the communication system to the remote center. The destination call number is the first call number in the callback connection.

9.19.38.2  
Area: Integrated modem 

Internal call number, DID call number  
Numbers for internal calls and direct inward dialing calls (DID) for the IMOD can be configured here.

9.19.38.3  
Digital Modem 

Internal call number, DID call number  
Numbers for internal calls and DID calls for the second ELIC (B-channel) can be configured in these fields.

See also:  
   -   Section 9.19 "Transfer"
   -   Section 9.19.1 "Transfer | Communication"

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03