13.1.3 |
Default Station Number Instead of Multiple Subscriber Number (MSN) |
Definition |
| This feature was created to increase security and to settle call charges (in a hotel environment, for example). Previously, the system was able to automatically configure each valid MSN. This meant that the settlement of call charges and call detail recording took place under a number which the CS operator did not necessarily enter. In addition to dialing an MSN, users now have the option of dialing the internal default station number instead. Below is a brief explanation: Every port and thus every telephone is assigned a consecutive, increasing, internal default station number. This means that each ISDN S0 bus is assigned a default number. For an ISDN adapter, the default number is identical to the number of the logical port in the client (secondary) optiPoint 500 or OpenStage TDM telephone. Permitted call numbers are assigned by default, however, they can be changed using Manager E. Every station number is always assigned to one logical port number. The default numbers can be used as follows: |
| • | Outgoing call setup: The system sets up the call using the default number, regardless of the MSN sent by a telephone or application. Customers are billed on the basis of the default number (in a hotel environment, this can be the room number), combined with a fixed number combination. |
| • | Incoming call setup: When a customer equates the MSN of an application (which may be installed on a notebook computer and connected to the hotel telephone network via an ISDN adapter) with the default number of a hotel room (combined with a fixed number combination), callers can reach the PC directly from the outside by direct inward dialing. |
Model-Specific Data |
| |
| HiPath 3000/5000 V9, Feature Description, Issue 10 | up |
|
|
||
| Disclaimer & Copyright | ID: P31003H3590F100017618 | 2014-02-27 |