12.9 |
Toll Fraud Monitoring |
| Implementing features, see also Manager E Toll Fraud Monitoring |
Definition |
| This feature can provide the customer with protection against toll fraud. |
| In the case of trunk-to-trunk connections, the customer can detect a possible fraudulent use by monitoring outgoing trunk calls. |
| When connection times exceed a defined duration, an indication is displayed on the attendance console (AC). If necessary, the connection can be released by means of a procedure. |
| No default time (Toll Fraud monitoring timer) is specified for this feature; that is, the attendant console will not be alerted unless the timer is set to a specific value. |
| Operation |
| If a trunk-to-trunk connection (for example a connection set up via DISA) exceeds the system timer defined by Toll Fraud monitoring timer, a display message is sent to the Attendant position. |
| The attendant is presented with the following display: Time exceeded Clear Error Message? The attendant first scrolls to find the number of the trunks involved in the call and can release the trunks. On the Memory telephone, there is a cursor to select the individual line. Or, after taking note of the numbers, the attendant clears the error message and can invoke the Release Trunk feature to clear the connection at a later time, if appropriate. |
| The attendant invokes the Release Trunk feature from an idle state by dialing the default access code *43 or by pressing the Program/Service key and scrolling to and selecting the prompt *43=Release trunk?. The attendant is then prompted to enter a trunk number. After entering the trunk number from above, the connection is released. |
Model-Specific Data |
| |
| HiPath 3000/5000 V9, Feature Description, Issue 10 | up |
|
|
||
| Disclaimer & Copyright | ID: P31003H3590F100017618 | 2014-02-27 |