10.1.5 OpenStage Accessories

10.1.5	OpenStage Accessories

10.1.5.1

External Power Supply

In case of certain configurations, an external power supply unit is required (see Section 10.1.4 "Powering the OpenStage Telephones, Add-On Devices, and Adapters").

The AC adapter features two MW6 connectors.

With the additional power supply of the OpenStage BLF, the connection of the power supply unit depends on the hardware output of the OpenStage BLF:

Caution

The power supply unit used for an OpenStage BLF should only be used for this purpose. Using the free jack of the power supply unit to power another terminal or device is not permitted and can lead to the destruction of the OpenStage BLF.

•	OpenStage BLF up to an including hardware output S30817-S7406-A101-7/-A103-2: The external power supply unit is connected directly to the OpenStage BLF. The left jack of the power supply unit labelled "Digital" (Fig. 10-19 for the TDM connection variant) must be connected to the BLF.

•	OpenStage BLF from hardware output S30817-S7406-A101-8/-A103-3: The OpenStage BLF is powered by the associated terminal. The power supply unit (Fig. 10-18 for CorNet-IP connection variant) should be connected to the terminal.

OpenStage terminals with the CorNet-IP connection variant

Fig. 10-18

OpenStage (CorNet-IP) - Connection of the External Power Supply Unit

OpenStage terminals with TDM connection variant

Fig. 10-19

OpenStage (TDM) - Connection of the External Power Supply Unit

Variants

•	AC adapter, Euro: C39280-Z4-C510

•	AC adapter, UK: C39280-Z4-C512

•	AC adapter, 110 V USA: C39280-Z4-C511

Technical specifications

AC adapter, Euro:

C39280-Z4-C510

AC adapter, UK:

C39280-Z4-C512

AC adapter, 110 V USA:

C39280-Z4-C511

Line voltage

230 Vac

120 VAC

Line frequency

50 Hz

60 Hz

Output voltage

max. 43 Vdc,

min. 30 Vdc

max. 43 Vdc,

min. 30 Vdc

max. 43 Vdc,

min. 30 Vdc

Output current

480 mA

10.1.5.2

OpenStage PhoneAdapter

Fig. 10-20

OpenStage PhoneAdapter

The OpenStage PhoneAdapter is used to connect a second OpenStage (TDM) terminal (UP0/E or analog connection) with its own power supply.

The system treats the OpenStage telephone as an independent telephone with a separate phone number and its own B channel. The OpenStage telephone can send and receive calls regardless of the connection status of the host telephone.

The OpenStage PhoneAdapter can be operated only in the following combinations:

•	An OpenStage TDM phone (UP0/E master)

•	Two OpenStage TDM phones (UP0/E master, UP0/E slave)

•	One OpenStage TDM telephone and an analog terminal (UP0/E master, a/b).

It is not possible to simultaneously operate two system telephones and an analog device.

T/R interface properties

The pin assignment of the modular jacks can be different on analog devices. Compare the pin assignment below with the pin assignment of your analog terminal.

Pin assignment of the Western Modular jack (RJ12):

Fig. 10-21

Western-Modular jack (RJ12)

The properties of the T/T interface are:

•	Supply current: 30 mA

•	Busy signal when both B channels are busy

•	Ring sequence: 2.2

•	Supports only DTMF with Flash

•	No ground signaling allowed

•	Does not support: VoiceMail server with T/R interface, message waiting lamp, dictating equipment, speaker, announcement device (such as start/stop).

If the pins 3 and 4 are used on your analog device, you can use the supplied connection cable.

10.1.5.3

Headsets

Fig. 10-22

Headsets

The integrated Bluetooth technology supports user-friendly headsets.

The OpenStage 40/60/80 terminals are each equipped with a jack to connect corded (121 TR 9-5) and cordless headsets (121 TR 9-5).

Note: The headset ports for OpenStage terminals are coded RJ45 jacks. The headset connectors have RJ11 or RJ45 connectors. If there are contact problems (RJ45 jack <-> RJ11 connector), swat the RJ11 connector of the affected headset for an RJ45 connector. A coded RJ45 connector can be ordered using the part number C39334- Z93-C350 (normal RJ45 ISDN connectors do not fit).

HiPath 3000/5000 V8, Service Documentation, Issue 10		up

Disclaimer & Copyright	ID: P31003H3580S100017620	2011-01-24