Topic
Section 2.1 "HiPath 3000"
•   Section 2.1.1 "Electrical Environment"
•   Section 2.1.2 "Lightning Protection"
•   Section 2.1.3 "Individual HiPath 3000 System Models"
•   Section 2.1.4 "Design and Dimensions of the HiPath 3000 Systems"    -   Section 2.1.4.1 "Design and Dimensions of HiPath 3800"    -   Section 2.1.4.2 "Design and Dimensions of HiPath 3550"    -   Section 2.1.4.3 "Design and Dimensions of HiPath 3350"    -   Section 2.1.4.4 "Design and Dimensions of HiPath 3500"    -   Section 2.1.4.5 "Design and Dimensions of HiPath 3300"
•   Section 2.1.5 "System Environment of the HiPath 3000 Systems"    -   Section 2.1.5.1 "System Environment HiPath 3800"    -   Section 2.1.5.2 "System Environment HiPath 3550"    -   Section 2.1.5.3 "System Environment HiPath 3350"    -   Section 2.1.5.4 "System Environment HiPath 3500"    -   Section 2.1.5.5 "System Environment HiPath 3300"
Section 2.2 "HiPath 5000"
Section 2.3 "System-Specific Capacity Limits for HiPath 3000, HiPath 5000"
Section 2.4 "Static Configuration Rules"
•   Section 2.4.1 "Resources and Capacity Limits"
•   Section 2.4.2 "Gateway Channels (DSP Channels)"
•   Section 2.4.3 "Connections to ITSP"
•   Section 2.4.4 "MOH Channels (G.711, G.723, G.729)"
•   Section 2.4.5 "IP Networking Channels (PBX Networking Channels)"
•   Section 2.4.6 "Bandwidth Control for IP Networking Channels (PBX Networking Channels)"
•   Section 2.4.7 "DMC (Direct Media Connection) Channels"
•   Section 2.4.8 "ISDN Routing/PPP Channels"
•   Section 2.4.9 "Fax/Modem Channels"
Section 2.5 "Dynamic Configuration Rules"
•   Section 2.5.1 "Dynamic Performance Characteristics"
•   Section 2.5.2 "Thumb Rule for HiPath 3000/5000 V8"
•   Section 2.5.3 "Thumb Rule for HG 1500 V3.0"
•   Section 2.5.4 "Example of Application of Thumb Rule"
•   Section 2.5.5 "Maximum Number of Devices for Special Cases"
Section 2.6 "Technical Specifications for HiPath 3000"
Section 2.7 "Interface-to-Interface Ranges"
Section 2.8 "Country-Specific Ring Frequencies for Analog Subscriber Line Modules"
Section 2.9 "Numbering Plan"
Section 2.10 "Technical Specifications and Compliance to HiPath 3000"
•   Section 2.10.1 "CE Compliance (not for U.S.)"
•   Section 2.10.2 "Compliance with US and Canadian Standards (for U.S. and Canada only)"
•   Section 2.10.3 "SAFETY International"
Section 2.11 "Environmental Conditions"
•   Section 2.11.1 "Electrical Operating Conditions"
•   Section 2.11.2 "Mechanical Operating Conditions"