9.2.1  
Hardware Upgrade 
 
The following hardware requirements apply to HiPath 3000/5000 V5.0 and higher.

Control boards  
If the control board necessary for operating HiPath 3000/5000 V5.0 and higher is not available, a replacement must be performed.

System  
Control board necessary for HiPath 3000/5000 V5.0 and higher  
HiPath 3800  
CBSAP (S30810-Q2314-X and higher)  
HiPath 3550  
HiPath 3350  
CBCC (S30810-Q2935-A401, S30810-Q2935-A301)  
HiPath 3500  
HiPath 3300  
CBRC (S30810-Q2935-Z401, S30810-Q2935-Z301)  
Note for upgrading from hardware < version 1.2:  
If the following subboards are present, they must be replaced: IMODN (replaces the IMOD), MMC (replaces the FMC), CMA/CMS (replaces the CGM/CGMC).  
For Deutsche Telekom AG only: The CBCP board S30810-Q2935-B201 must be replaced by a CBCC board S30810-Q2935-A301.  

Multimedia card MMC  
An MMC with at least 128 MB is required to run HiPath 3000/5000 V8 and higher.

HG 1500 boards  
The HG 1500 boards listed in the following table are necessary for using the HG 1500 functionality with HiPath 3000/5000 V5.0 and higher. Unnamed HG 1500 boards must be replaced.

System  
HG 1500 board required for HiPath 3000/5000 V5.0 and higher  
HiPath 3800  
STMI2 (S30810-Q2316-X100)  
HiPath 3550  
HiPath 3350  
HXGS3 (S30810-Q2943-X, S30810-Q2943-X1)  
HiPath 3500  
HiPath 3300  
HXGS3 (S30810-K2943-Z1)  
HiPath 3500  
HiPath 3300  
HXGR3 (S30810-K2943-Z)  

HiPath 3000/5000 V8, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580S100017620   2011-01-24