11.1  
Introduction 
 
For HiPath 3000 V1.2 and later, HiPath Cordless Office can be used on all systems of this product line.

Direct connection  
The BS3/1 (S30807-H5482-X) and BS4 (S30807-U5491-X) base stations can be connected directly to the UP0/E interfaces on the central control boards in the HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300. The connection must be made via one UP0/E interface each. A mix of base stations of types BS3/1 and BS4 is supported.
A BS3/S (X30807-X5482-X100) single-cell base station can be used to ensure the operation of a maximum of one base station at the UP0/E interfaces on central control boards in the HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300. In this case, it is not possible to expand with additional base stations.
However, base stations cannot be simultaneously connected to the SLC16/SLC16N board and the CBCC within one HiPath 3550 system.
The base stations BS3/1 (S30807-H5482-X), BS3/3 (S30807-H5485-X), and BS3/S (X30807-X5482-X100) are being phased out and may no longer be ordered. You must use the successor product BS4 (S30807-U5491-X) instead of the types named.  
You can still operate the base stations listed in HiPath 3000. Base stations BS3/1, BS3/3, and BS4 can also be used in mixed mode.  

Connecting cordless boards  
Base stations can be connected to the UP0/E interfaces of the following cordless boards:
 •   SLC16N in HiPath 3550.
 •   SLCN in HiPath 3800
The SLC16 board (S30810-Q2922-X) is no longer supported in HiPath 3000/5000 V6.0 or later.  
The base stations BS3/1 (S30807-H5482-X), BS3/3 (S30807-H5485-X), and BS4 (S30807-U5491-X) may be used in mixed mode on the above cordless boards.
You can install up to four SLCN boards in HiPath 3800. All four boards provide full cordless functionality (roaming and seamless connection handover) because the radio fields on the cordless boards are synchronized within a single system (see Section 11.5 "Multi-SLC and System-Wide Networking").
The HiPath 3000 product line does not currently support the network-wide handover feature.

HiPath 3000/5000 V8, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580S100017620   2011-01-24