9.10.17 |
Ext. SIP |
| Ext. SIP is used to define the parameters for an external SIP (SIP= Session Initiation Protocol) Registrar . |
9.10.17.1 |
External SIP Registrar Mode flag. |
| The parameters for operation with an external SIP Registrar can only be entered if this flag has been activated. |
|
9.10.17.2 |
Area: Gateway |
Trunking Mode |
| The trunking mode affects the H225 call signaling, i.e., the transmission of feature-specific information . You can choose between |
| • | SIP Native: no transfer of feature-specific information |
| • | SIP-Q: Feature-specific information is transferred |
| SIP-Q is the ECMA default; the tunneling of QSIG (reference point Q signaling) is defined via SIP. |
Call number |
| The "Public Directory number" is configured here as in the case of the system number. The gateway in the own system can be reached under this number. |
Registration Expiry |
| Validity period for the registration, specified in seconds. Within the time period set here, the gateway registers itself cyclically at the external gatekeeper. |
IP address |
| IP address of the gateway. |
| If under "Environment" the option HiPath 8000 was selected, then the address of the main soft switch of the HiPath 8000 cluster is entered. A HiPath 8000 cluster consists of a main soft switch and a backup soft switch, i. e. two HiPath 8000. If a HiPath 3000 communicates with the HiPath 8000 cluster via a Survivable Proxy, then the address of the Survivable Proxy is entered here. |
| See also sections "TLS" und "Alternate RG IP Adresse". |
Port |
| Port number of the gateway. |
TLS |
| If only visible when under "Environment" the option HiPath 8000 was selected. By default this checkbox is not activated. |
| If the checkbox is activated, a secure TCP/TLS connection is used for: |
| • | Registering HiPath 3000 on the HiPath 8000 cluster. A HiPath 8000 cluster consists of a main soft switch and a backup soft switch, i. e. two HiPath 8000. |
| • | Call signaling between 3000 and the main HiPath 8000 |
| • | Call signaling from the backup HiPath 8000 to HiPath 3000 |
| See also "Alternate RG IP Adresse". |
Alternate RG IP Adresse |
| If only visible when under "Environment" the option HiPath 8000 was selected. The address 0.0.0.0 is entered by default. |
| The IP address of the backup soft switch of the HiPath 8000 cluster is entered in this input window A HiPath 8000 cluster consists of a main soft switch and a backup soft switch, i. e. two HiPath 8000. |
| See als section "TLS". |
9.10.17.3 |
Security |
Authentication Options |
| The following fields are enabled and must be filled only if Authentication Required has been selected. |
SIP - Userid |
| User name |
Password / Confirm password |
| Enter the password here and confirm it by repeating the entry. |
Realm |
| Realm designates the zone and is a freely selectable name. |
9.10.17.4 |
Perform Registrar |
| The system registers at the registrar if this flag is activated. If this flag is deactivated, registration is not performed (for simplified configuration of a third-party node, such as, HiPath 4000). |
| |
| HiPath 3000/5000 V8, Manager E, Administrator Documentation, Issue 11 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3580M1000176A9 | 2011-03-18 |
