|
Table 10-1
|
Protocols for TDM and IP-based networking
|
|
|
|
|
|
|
|
|
| Signaling protocol for digital communication between Siemens Enterprise Communications GmbH & Co. KG communication systems.
|
| Note: Systems should only be networked via CorNet-N if these are V4.0 or earlier.
|
|
|
•
|
Networking HiPath 3000 zones
|
|
•
|
Networking with HiPath 4000
|
|
|
|
| Signaling protocol for digital communication between Siemens Enterprise Communications GmbH & Co. KG communication systems.
|
|
|
•
|
Networking HiPath 3000 zones
|
|
•
|
Networking with HiPath 4000
|
|
|
|
| Cross-manufacturer signaling protocol in accordance with ECMA and ISO
|
|
|
•
|
Networking with HiPath 4000
|
|
•
|
Networking with systems from other manufacturers
|
|
|
|
| Signaling protocol for analog tie traffic
|
|
|
•
|
Networking with HiPath 4000
|
|
•
|
Networking with systems from other manufacturers
|
|
|
|
|
|
| CorNet-NQ protocol, tunneled in H.323 via Annex M1
|
|
| IP networking with HiPath 2000 / HiPath OpenOffice EE, HiPath 3000, HiPath 4000 and HiPath 5000
|
|
|
|
| The CorNet-IP protocol is no longer supported from HiPath 3000 V8 and HiPath 4000 V5 to network both of these systems.
|
|
|
|
| SIP-Q V2 (QSIG with CorNet-NQ tunneled via SIP)
|
|
IP networking with HiPath 2000 / HiPath OpenOffice EE, HiPath 3000, HiPath 4000, HiPath 5000,
OpenScape Voice
|
|
|
|
| From HiPath 3000 V8 and HiPath 4000 V5 only the SIP-Q V2 protocol is used to IP network these two systems and the CorNet-NQ protocol is used for TDM networking. The CorNet-IP protocol is no longer supported.
|
|
