Subject	HiPath 3800	HiPath 3550    HiPath 3500	HiPath 3350    HiPath 3300
Feature available in	x	x	x
Hardware requirements	-	-	-
Software requirements	V5.0 or later	V1.0 or later	V1.0 or later
Number of LCR classes of service	15

Subject	Dependency/Restriction
LCR	If all the least expensive connection routes have been seized, LCR automatically switches to defined more expensive routes. The system can signal this to the user both visually and acoustically.
	The dialed station number is displayed until the station number information on the other party is received.
	If LCR is activated, the system checks for the least costly route for every trunk seizure (except when a trunk code is dialed).
LCR	Digits can be transmitted either singly or en-bloc, depending on the access method and the dial plan.
	After an account code is entered, it applies to the entire connection setup.
	The allowed and denied lists are also used for LCR. The toll restriction check then refers to the digits dialed at the station without considering the trunk group code.
LCR Class of Service	The LCR class of service determines whether a station can use the route recommended in the path table.
Automatic line seizure (Prime Line on)	If "automatic line seizure" (Prime Line) is activated to the CO, Least Cost Routing (LCR) is not possible. These two features are mutually exclusive.