10.5.2 optiPoint 500 Add-On Devices

10.5.2	optiPoint 500 Add-On Devices

The optiPoint key module and optiPoint BLF add-on devices increase the number of function keys available.

The user usually installs the add-on devices. The installation instructions are on the "Electronic Operating Instructions" CD.

Caution

Always disconnect the line cord before connecting add-on devices to the telephone.

Refer to the optiPoint BLF Feature Description for model-specific data for the optiPoint key module and the HiPath 3000/5000.

The following sections contain information on the possible key module configurations:

•	Section 10.5.2.3 "Possible Configurations for the Key Modules" for terminals in the optiPoint 500 family

•	Section 10.2.4.3 "Possible Configurations for the Key Modules" for terminals in the optiPoint 410 and optiPoint 420 family

10.5.2.1

optiPoint key module

The optiPoint key module is an add-on device that should be mounted on the side of the telephone; it provides an additional 16 keys, LEDs and labeling areas for all purposes.

Fig. 10-42

optiPoint key module

Information on double assignment can be found in Section 10.6 "Key Programming".

10.5.2.2

optiPoint BLF

This is an add-on device that provides 90 additional keys, LEDs and labeling areas for all purposes.

The device is connected to the telephone or to an optiPoint key module over an interface cable with the following connectors: RJ11 input (MW6), RJ45 output (MW8).

Power is supplied by a local PSU (see Section 10.8.1.1 "Local Power Supply for optiPoint 500, optiPoint 600 office") that can power up to two optiPoint BLFs. The power supply unit must be plugged directly into the designated optiPoint BLF port.

Fig. 10-43

optiPoint BLF

10.5.2.3

Possible Configurations for the Key Modules

The following table shows the possible configurations for key modules on telephones from the optiPoint 500 family (not optiPoint 500 entry and optiPoint 500 economy).

Table 10-6

Key module configurations on an optiPoint 500 telephone

optiPoint 500 telephone

First key module

Second key module

optiPoint 500 basic

optiPoint 500 standard, optiPoint 500 standard SL (for U.S. only)

optiPoint 500 advance

optiPoint key module

optiPoint BLF

optiPoint BLF1

1Configuration with two optiPoint BLFs only with HiPath 3800

HiPath 3000/5000 V8, Service Documentation, Issue 10		up

Disclaimer & Copyright	ID: P31003H3580S100017620	2011-01-24