3.4.7  
EXMNA (for U.S. only) 
 

Introduction  
The EXMNA (external music on hold) module provides a connection for external music on hold in HiPath 3550 and HiPath 3350.
The EXMNA connects to the CBCC and CBCP board (connector X4) by means of a ribbon cable.
 •   Ribbon cable connected = External music
 •   Ribbon cable not connected = Internal music
Expert mode code 22 11 allows you to choose between music on, music off, ring tone, or music on unscreened transfer. If the EXMNA module is connected, you must select Music on using Manager T or HiPath 3000/5000 Manager E. The module is operational as soon as it is plugged in.

Interfaces  
 Figure 3-144   EXMNA (for U.S. only) (S30807-Q6923-X)
 
 Figure 3-145   EXMNA (for U.S. only) - Slot for HiPath 3550 and HiPath 3350
 

Contact assignment  

 Table 3-183   EXMNA (for U.S. only) - Contact Assignments
 Contact  
 Connector X1  
 Connector X2  
 1  
 GND  
 Input  
 2  
 Not assigned  
 Input  
 3  
 Not assigned  
 Not assigned  
 4  
 EXMCL  
 Not assigned  
 5  
 EXMDIR  
   
 6  
 HRES  
   
 7  
 EXMD  
   
 8  
 EXMDET  
   
 9  
 +5 V  
   
 10  
 Not assigned  
   

HiPath 3000/5000 V8, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580S100017620   2011-01-24