3.3.19  

SLMAV 
 
The SLMAV board (Subscriber Line Module Analog Vinetic) replaces the SLMAE, SLMAE8, SLMAE200, SLMA, SLMA8 and SLMA2 boards in HiPath 3000. It will be available as of August 2011.
NOTE: Danger of damage to property due to surge voltage. The required lightning protection measures must be taken for this board, see Section 2.1.2 "Lightning Protection".  

Introduction  
SLMAV has the same features as the SLMAE board. It provides analog T/R interfaces for use in HiPath 3800. The SLMAV board is available for HiPath 3800 in the following variants:
 •   SLMAV8 (S30810-Q2227-X100) = 8 analog T/R interfaces
 •   SLMAV24 (S30810-Q2227-X200) = 24 analog T/R interfaces
Application: SLMAV can be used as of HiPath 3800 V7 and V8, but not in older versions of HiPath 3800. It is supported in IP and TDM environments. Automatic migration to SLMAV is not possible. The slot in HiPath 3800 must be enabled via Manager E/C.
Code Receiver: A code receiver is available for each T/R interface (permits DTMF dialing at analog telephones). This guarantees that all analog terminals connected are fully accessible.
CLIP: These boards support calling name identification presentation (CLIP).
External analog extensions:
 •   External analog extensions may only be connected via the SLMAV board.
 •   For U.S. only: The connection of external analog extensions via OPS signaling (OPS: Off-Premises-Station) is not supported.
Ring voltage: The SLMAV board generates it own ring voltage of 71 Veff . An external ring voltage generator is therefore not required.

Product image  
 Bild 3-69   SLMAV8, SLMAV24
 

Front panel  
 Bild 3-70   SLMAV8, SLMAV24 - LEDs in the front panel
 

Shielding panel  
To ensure sufficient shielding, provide the board with a shielding panel. For information on mounting the shielding panel, see Section 4.1.5.4 "Mounting Connector Panels (if required)".

LED statuses and their meanings  

 Tabelle 3-89   SLMAV8, SLMAV24 - LED statuses
 Red LED  
 Green LED  
 Status  
 Action  
 Off  
 Off  
Board not receiving power or not plugged in correctly.  
Board is out of order.  
Check plug contact on board.  
 On  
 Flashing  
Board performs a self-test.  
 
 Flashing slow  
 Off  
Board is faulty.  
Replace board.  
 Flashing quick  
 Off  
Loadware is being loaded.  
 
 Off  
 On  
Loading was successfully completed and board is OK (idle state). No subscriber line circuit is active.  
 
 Off  
 Flashing  
At least one subscriber line circuit is activated.  
 
 On  
 On  
Major hardware or loadware error  
Replace board.  

Cable and connector assignment  
 •   For connecting to the SIVAPAC connector on the backplane: Tabelle 3-90
 •   For connecting to the connector panels using RJ45 jacks: Tabelle 3-91
 •   For U.S. only: For connecting to the connector panels with CHAMP jack: Tabelle 3-92
 •   For connecting to the connector panels using SIPAC 1 SU connectors: Tabelle 3-93 and Tabelle 3-94

 Tabelle 3-90   SLMAV8, SLMAV24 - SIVAPAC Connector Assignment on the Backplane
 Pair  
 a-wire (tip)1  
 b-wire (ring)1  
 SIVAPAC connector  
 SLMAV8, SLMAV24  
 MDFU-E  
 Notes  
 1  
 wht/blu  
   
 1  
 1a  
 Port 1  
 1a  
   
   
 blu/wht  
 23  
 1b  
 1b  
 2  
 wht/ora  
   
 3  
 2a  
 Port 2  
 2a  
   
   
 ora/wht  
 4  
 2b  
 2b  
 3  
 wht/grn  
   
 5  
 3a  
 Port 3  
 3a  
   
   
 grn/wht  
 6  
 3b  
 3b  
 4  
 wht/brn  
   
 7  
 4a  
 Port 4  
 4a  
   
   
 brn/wht  
 8  
 4b  
 4b  
 5  
 wht/gry  
   
 9  
 5a  
 Port 5  
 5a  
   
   
 gry/wht  
 10  
 5b  
 5b  
 6  
 red/blu  
   
 11  
 6a  
 Port 6  
 6a  
   
   
 blu/red  
 12  
 6b  
 6b  
 7  
 red/ora  
   
 13  
 7a  
 Port 7  
 7a  
   
   
 ora/red  
 14  
 7b  
 7b  
 8  
 red/grn  
   
 15  
 8a  
 Port 8  
 8a  
   
   
 grn/red  
 16  
 8b  
 8b  
 9  
 red/brn  
   
 17  
 9a  
 Port 9  
 9a  
 not used in SLMAV8  
   
 brn/red  
 18  
 9b  
 9b  
 10  
 red/gry  
   
 19  
 10a  
 Port 10  
 10a  
   
 gry/red  
 20  
 10b  
 10b  
 11  
 blk/blu  
   
 24  
 11a  
 Port 11  
 11a  
   
 blu/blk  
 25  
 11b  
 11b  
 12  
 blk/ora  
   
 26  
 12a  
 Port 12  
 12a  
   
 ora/blk  
 27  
 12b  
 12b  
 13  
 blk/grn  
   
 29  
 13a  
 Port 13  
 13a  
   
 grn/blk  
 30  
 13b  
 13b  
 14  
 blk/brn  
   
 31  
 14a  
 Port 14  
 14a  
   
 brn/blk  
 32  
 14b  
 14b  
 15  
 blk/gry  
   
 34  
 15a  
 Port 15  
 15a  
   
 gry/blk  
 35  
 15b  
 15b  
 16  
 yel/blu  
   
 37  
 16a  
 Port 16  
 16a  
   
 blu/yel  
 38  
 16b  
 16b  
 17  
 yel/ora  
   
 43  
 17a  
 Port 17  
 17a  
 not used in SLMAV8  
   
 ora/yel  
 44  
 17b  
 17b  
 18  
 yel/grn  
   
 45  
 18a  
 Port 18  
 18a  
   
 grn/yel  
 46  
 18b  
 18b  
 19  
 yel/brn  
   
 47  
 19a  
 Port 19  
 19a  
   
 brn/yel  
 48  
 19b  
 19b  
 20  
 yel/gry  
   
 49  
 20a  
 Port 20  
 20a  
   
 gry/yel  
 50  
 20b  
 20b  
 21  
 vio/blu  
   
 51  
 21a  
 Port 21  
 21a  
   
 blu/vio  
 52  
 21b  
 21b  
 22  
 vio/ora  
   
 53  
 22a  
 Port 22  
 22a  
   
 ora/vio  
 54  
 22b  
 22b  
 23  
 vio/grn  
   
 55  
 23a  
 Port 23  
 23a  
   
 grn/vio  
 56  
 23b  
 23b  
 24  
 vio/brn  
   
 57  
 24a  
 Port 24  
 24a  
   
 brn/vio  
 58  
 24b  
 24b  
1see "Abbreviations for colors" at the start of Section 3.3 "Peripheral Boards".

 Tabelle 3-91   SLMAV8, SLMAV24 - Connector Panel Assignment with RJ24 Jacks
 RJ45 jack  
 SLMAV8, SLMAV24  
 Notes  
 No.  
 Pin  
 1  
 4  
 1a  
   
 5  
 1b  
 2  
 4  
 2a  
   
 5  
 2b  
 3  
 4  
 3a  
   
 5  
 3b  
 4  
 4  
 4a  
   
 5  
 4b  
 5  
 4  
 5a  
   
 5  
 5b  
 6  
 4  
 6a  
   
 5  
 6b  
 7  
 4  
 7a  
   
 5  
 7b  
 8  
 4  
 8a  
   
 5  
 8b  
 9  
 4  
 9a  
 not used in SLMAV8  
 5  
 9b  
 10  
 4  
 10a  
 5  
 10b  
 11  
 4  
 11a  
 5  
 11b  
 12  
 4  
 12a  
 5  
 12b  
 13  
 4  
 13a  
 5  
 13b  
 14  
 4  
 14a  
 5  
 14b  
 15  
 4  
 15a  
 5  
 15b  
 16  
 4  
 16a  
 5  
 16b  
 17  
 4  
 17a  
 not used in SLMAV8  
 5  
 17b  
 18  
 4  
 18a  
 5  
 18b  
 19  
 4  
 19a  
 5  
 19b  
 20  
 4  
 20a  
 5  
 20b  
 21  
 4  
 21a  
 5  
 21b  
 22  
 4  
 22a  
 5  
 22b  
 23  
 4  
 23a  
 5  
 23b  
 24  
 4  
 24a  
 5  
 24b  

 Tabelle 3-92   SLMAV8, SLMAV24 - Connector Panel Assignment with CHAMP Jack (for U.S. only)
 CHAMP jack  
 SLMAV8, SLMAV24  
 Notes  
 1  
 1a  
 1 Ring  
 Port 1  
   
 26  
 1b  
 1 TIP  
 2  
 2a  
 2 Ring  
 Port 2  
   
 27  
 2b  
 2 TIP  
 3  
 3a  
 3 Ring  
 Port 3  
   
 28  
 3b  
 3 TIP  
 4  
 4a  
 4 Ring  
 Port 4  
   
 29  
 4b  
 4 TIP  
 5  
 5a  
 5 Ring  
 Port 5  
   
 30  
 5b  
 5 TIP  
 6  
 6a  
 6 Ring  
 Port 6  
   
 31  
 6b  
 6 TIP  
 7  
 7a  
 7 Ring  
 Port 7  
   
 32  
 7b  
 7 TIP  
 8  
 8a  
 8 Ring  
 Port 8  
   
 33  
 8b  
 8 TIP  
 9  
 9a  
 9 Ring  
 Port 9  
 not used in SLMAV8  
 34  
 9b  
 9 TIP  
 10  
 10a  
 10 Ring  
 Port 10  
 35  
 10b  
 10 TIP  
 11  
 11a  
 11 Ring  
 Port 11  
 36  
 11b  
 11 TIP  
 12  
 12a  
 12 Ring  
 Port 12  
 37  
 12b  
 12 TIP  
 13  
 13a  
 13 Ring  
 Port 13  
 38  
 13b  
 13 TIP  
 14  
 14a  
 14 Ring  
 Port 14  
 39  
 14b  
 14 TIP  
 15  
 15a  
 15 Ring  
 Port 15  
 40  
 15b  
 15 TIP  
 16  
 16a  
 16 Ring  
 Port 16  
 41  
 16b  
 16 TIP  
 17  
 17a  
 17 Ring  
 Port 17  
 not used in SLMAV8  
 42  
 17b  
 17 TIP  
 18  
 18a  
 18 Ring  
 Port 18  
 43  
 18b  
 18 TIP  
 19  
 19a  
 19 Ring  
 Port 19  
 44  
 19b  
 19 TIP  
 20  
 20a  
 20 Ring  
 Port 20  
 45  
 20b  
 20 TIP  
 21  
 21a  
 21 Ring  
 Port 21  
 46  
 21b  
 21 TIP  
 22  
 22a  
 22 Ring  
 Port 22  
 47  
 22b  
 22 TIP  
 23  
 23a  
 23 Ring  
 Port 23  
 48  
 23b  
 23 TIP  
 24  
 24a  
 24 Ring  
 Port 24  
 49  
 24b  
 24 TIP  

 Tabelle 3-93   SLMAV8, SLMAV24 - Connector Panel Assignment with SIPAC 1 SU Connectors (cable for ports 1 - 16)
 Color Group  
 Pair  
 a-wire (tip)1  
 b-wire (ring)1  
 SU connector  
 SLMAV8, SLMAV24  
 MDFU-E  
 Patch Panel,
MW8 pin
 
 Notes  
 1  
 1  
 wht/blu  
   
 19  
 1a  
 Port 1  
 1a  
 4  
   
   
 blu/wht  
 39  
 1b  
 1b  
 5  
 2  
 wht/ora  
   
 38  
 2a  
 Port 2  
 2a  
 4  
   
   
 ora/wht  
 48  
 2b  
 2b  
 5  
 3  
 wht/grn  
   
 27  
 3a  
 Port 3  
 3a  
 4  
   
   
 grn/wht  
 47  
 3b  
 3b  
 5  
 4  
 wht/brn  
   
 16  
 4a  
 Port 4  
 4a  
 4  
   
   
 brn/wht  
 46  
 4b  
 4b  
 5  
 5  
 wht/gry  
   
 05  
 5a  
 Port 5  
 5a  
 4  
   
   
 gry/wht  
 45  
 5b  
 5b  
 5  
 2  
 6  
 red/blu  
   
 14  
 6a  
 Port 6  
 6a  
 4  
   
   
 blu/red  
 44  
 6b  
 6b  
 5  
 7  
 red/ora  
   
 23  
 7a  
 Port 7  
 7a  
 4  
   
   
 ora/red  
 43  
 7b  
 7b  
 5  
 8  
 red/grn  
   
 32  
 8a  
 Port 8  
 8a  
 4  
   
   
 grn/red  
 42  
 8b  
 8b  
 5  
 9  
 red/brn  
   
 11  
 9a  
 Port 9  
 9a  
 4  
 not used in SLMAV8  
   
 brn/red  
 31  
 9b  
 9b  
 5  
 10  
 red/gry  
   
 02  
 10a  
 Port 10  
 10a  
 4  
   
 gry/red  
 22  
 10b  
 10b  
 5  
 3  
 11  
 blk/blu  
   
 13  
 11a  
 Port 11  
 11a  
 4  
   
 blu/blk  
 33  
 11b  
 11b  
 5  
 12  
 blk/ora  
   
 04  
 12a  
 Port 12  
 12a  
 4  
   
 ora/blk  
 24  
 12b  
 12b  
 5  
 13  
 blk/grn  
   
 15  
 13a  
 Port 13  
 13a  
 4  
   
 grn/blk  
 35  
 13b  
 13b  
 5  
 14  
 blk/brn  
   
 06  
 14a  
 Port 14  
 14a  
 4  
   
 brn/blk  
 26  
 14b  
 14b  
 5  
 15  
 blk/gry  
   
 17  
 15a  
 Port 15  
 15a  
 4  
   
 gry/blk  
 37  
 15b  
 15b  
 5  
 4  
 16  
 yel/blu  
   
 08  
 16a  
 Port 16  
 16a  
 4  
   
 blu/yel  
 28  
 16b  
 16b  
 5  
1see "Abbreviations for colors" at the start of Section 3.3 "Peripheral Boards".

 Tabelle 3-94   SLMAV8, SLMAV24 - Connector Panel Assignment with SIPAC 1 SU Connectors (cable for ports 17 - 24)
 Color Group  
 Pair  
 a-wire (tip)1  
 b-wire (ring)1  
 SU connector  
 SLMAV8, SLMAV24  
 MDFU-E  
 Patch Panel,
MW8 pin
 
 Notes  
 1  
 1  
 wht/blu  
   
   
   
 Free  
   
   
   
   
 blu/wht  
   
   
   
   
 2  
 wht/ora  
   
   
   
 Free  
   
   
   
   
 ora/wht  
   
   
   
   
 3  
 wht/grn  
   
   
   
 Free  
   
   
   
   
 grn/wht  
   
   
   
   
 4  
 wht/brn  
   
   
   
 Free  
   
   
   
   
 brn/wht  
   
   
   
   
 5  
 wht/gry  
   
   
   
 Free  
   
   
   
   
 gry/wht  
   
   
   
   
 2  
 6  
 red/blu  
   
   
   
 Free  
   
   
   
   
 blu/red  
   
   
   
   
 7  
 red/ora  
   
   
   
 Free  
   
   
   
   
 ora/red  
   
   
   
   
 8  
 red/grn  
   
   
   
 Free  
   
   
   
   
 grn/red  
   
   
   
   
 9  
 red/brn  
   
 11  
 17a  
 Port 17  
 17a  
 4  
 not used in SLMAV8  
   
 brn/red  
 31  
 17b  
 17b  
 5  
 10  
 red/gry  
   
 02  
 18a  
 Port 18  
 18a  
 4  
   
 gry/red  
 22  
 18b  
 18b  
 5  
 3  
 11  
 blk/blu  
   
 13  
 19a  
 Port 19  
 19a  
 4  
   
 blu/blk  
 33  
 19b  
 19b  
 5  
 12  
 blk/ora  
   
 04  
 20a  
 Port 20  
 20a  
 4  
   
 ora/blk  
 24  
 20b  
 20b  
 5  
 13  
 blk/grn  
   
 15  
 21a  
 Port 21  
 21a  
 4  
   
 grn/blk  
 35  
 21b  
 21b  
 5  
 14  
 blk/brn  
   
 06  
 22a  
 Port 22  
 22a  
 4  
   
 brn/blk  
 26  
 22b  
 22b  
 5  
 15  
 blk/gry  
   
 17  
 23a  
 Port 23  
 23a  
 4  
   
 gry/blk  
 37  
 23b  
 23b  
 5  
 4  
 16  
 yel/blu  
   
 08  
 24a  
 Port 24  
 24a  
 4  
   
 blu/yel  
 28  
 24b  
 24b  
 5  
1see "Abbreviations for colors" at the start of Section 3.3 "Peripheral Boards".