10.2.4 |
Output format | LAN settings |
| LAN settings are displayed by clicking on the LAN settings button in the Output format tab. |
| As of Hicom 150 H V1.0 (Hicom 150 E Office Rel. 3.0), the call charges can be output via LAN in 3 different modes. In this case, additional parameters can be set up via LAN settings. |
10.2.4.1 |
Area: Call Detail Recording Central (CDRC) |
| Call charges can be recorded via LAN with three different output modes. The corresponding method is selected in accordance with the application connected. |
TFTP client |
| Call charge data is sent to an external application by the TFTP client. Transmission is controlled by a centrally-adjusted timer (e.g. every 10 minutes) and a fixed threshold value (when around 80% of the internal call charge buffer is full). A connection to the TFTP server is set up at the appropriate time, all existing call charge data is transmitted in a file and the connection is then terminated. If the server connection cannot be set up, an alternative server is addressed. |
| A new file name is used for each session. |
| The IP addresses of both servers (with a fixed Port 69) and the timer can be configured via Server 1, Server 2 and Cycle. |
TCP client |
| If call charges have been incurred, a TCP/IP connection to an external call charge server (external application) is initiated by the client. When the connection has been set up, the call charge data is transmitted. The connection remains permanently open, and any other charges that occur are transmitted. Each data record is therefore transmitted individually. |
| The TCP/IP address of the server can be configured via IP address. |
TFTP Server |
| An external application requests output of call charge data via a TFTP client. In order to do this, the application must set up a connection and request the call charge data. All existing call charge data is then transmitted and the connection is terminated. |
| The application can request the call charge data either independently, or when triggered by an SNMP trap. The SNMP trap Data available is generated by means of the configurable threshold value monitoring of the internal call charge buffer. The value under Threshold indicates an approximate percentage. |
| The IP addresses of authorized clients can be configured under the SNMP partner/Communication Partner. The TFTP server port in the communication system is fixed (69). |
10.2.4.2 |
Area: Output format |
File format, Separator |
| You can choose between DOS mode with CR, LF at the end of a record or UNIX mode with only LF at the end of a record. |
File format, Separator |
| You can configure the separator between logical elements of a call charge record here. This means that the data is no longer required to stay in fixed positions. |
| (This setting is only active for call charge outputs CDRS, CDRT, CDR via LAN.) |
| |
| HiPath 3000/5000 V8, Manager E, Administrator Documentation, Issue 10 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3580M1000176A9 | 2011-01-24 |
