9.10.7  
Firewall 
 


Settings | Network | Firewall
 
Different security mechanisms exist to give protection from undesired connections. These security mechanisms are administered via Firewall.

9.10.7.1  
Area: IP firewall 
This category can have up to 40 entries. The table determines whether a LAN PC is allowed to send IP frames into another network via the communication system or if an external computer or external network has access to the local LAN or to the communication system. This allows or prevents routing into the PSTN and thus into remote networks, for example.
The IP addresses added to the firewall are displayed in the table.
To edit the parameters, double-click the corresponding table cell. The Firewall | Edit IP firewall dialog box is displayed.

Activate  
The IP firewall is activated or deactivated.
All IP addresses are initially blocked when the IP firewall is activated.  

9.10.7.2  
Area: Application firewall 
This category can have up to 10 entries. This firewall is effective at the system application level. The table determines which external computers are allowed to access the individual system applications.
The following applications can be enabled or blocked: Telnet, CSTA, APS, CDB, HiPath 3000 Manager, Log, Call detail recording, ASCII.
To edit the parameters, double-click the corresponding table cell. The Firewall | Edit application firewall dialog box is displayed.

Activate  
The application firewall is activated or deactivated.
Application Firewall can only be administered as of HiPath 3000 V1.2. The application firewall is always activated in older systems.

See also:  
   -   Section 9.10 "Settings | Network"
   -   Section 9.10.8 "Firewall | Edit IP firewall"
   -   Section 9.10.9 "Firewall | Edit application firewall"

HiPath 3000/5000 V8, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580M1000176A9   2011-01-24