9.10.14  
HiPath 5000 RSM/AllServe Parameters 
 


Settings | Network | HiPath 5000 RSM/AllServe Parameters
 
HiPath 5000 RSM/AllServe Parameters is used to specify the parameters for a networked system.

9.10.14.1  
Area: Server 

IP address  
The IP address of the server is entered here.
The IP address must be unique within the network. Any new IP address to be configured should therefore be "pinged" before it is assigned. If the IP address responds, it should not be assigned again.  

9.10.14.2  
Area: Node 

Node ID  
Each node in a networked system must be assigned a unique node ID. This enables the individual nodes in a networked system to be uniquely identified. Practical experience has shown that it is best to assign node ID = 1 to n.

See also:  
   -   Section 9.10 "Settings | Network"
   -   Section 9.10.9 "Firewall | Edit application firewall"

HiPath 3000/5000 V8, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580M1000176A9   2011-01-24