9.6.5 |
Groups/Hunt groups | Station parameters |
| Station parameters is used to administer the parameters of a station for the MULAP (Multiple Line appearance) group selected in Groups/hunt groups. |
9.6.5.1 |
Area: Stations, Previous member, Next member |
| The station's name and call number, as well as the MULAP name and call number, are displayed here. The Previous member and Next member buttons can be used to scroll through the members of the relevant MULAP. |
9.6.5.2 |
Area: Station parameters |
Master (M) |
| In the case of 'Call forwarding off', all MULAPs for which the terminal is the master are forwarded with the Master option. Callback is activated when the master telephone becomes free; messages are only signaled at the master. In a basic MULAP, at least one station must be defined as a master. |
| If stations have been defined as masters several times, it may happen that this master flag can no longer be set. The following rule applies: If multiple MULAPs with the same masters exist, the masters of a MULAP must always be the same as, a subset of or a set including subsets of the masters of the other MULAPs. |
| The Master option cannot be changed for members who have come to this MULAP from a Team/top. |
Executive MULAP (C) |
| In addition to the Master, the Executive option also determines acoustic call signaling. If Call forwarding has been activated, the calls come in to the executive or non-executives (secretaries). A conference corner telephone must now be defined as the second executive. |
| A station can only be defined once as a executive. |
Automatic seizure outgoing (A) |
| This option means that when the receiver is lifted, all calls are automatically dialed via the MULAP. If a station has not been set up for the Automatic seizure outgoing option, he/she must press a MULAP key to enable dialing. This is why a station can only set 'Automatic seizure outgoing' for one MULAP. When the option has been set for one MULAP, it is deactivated automatically for all other MULAPs. |
| The rule that all masters/executives in a MULAP have the same automatic seizure outgoing also applies (this is adjusted automatically). |
| If MULAPs with the same master exist, only the MULAP with the set including subsets of masters can obtain automatic seizure outgoing. This is why it may not be possible to set this option. |
| This option is set automatically for the master of a newly-created MULAP. |
Acoustic call (R) |
| The acoustic call can be switched on or off. |
No automatic incoming call acceptance (K) |
| When a MULAP call is signaled acoustically, the call is usually answered when the receiver is lifted. If this option is set, the call must be requested by pressing the MULAP key. |
| This option is always the same for a station in all MULAPs. The option cannot be set for terminals without a MULAP key (e.g. OFEs, Cordless, S0). |
Automatic privacy release (P) |
| If this option is set, a member of a MULAP group can join the call. In other words, a conference is initiated in this case. |
| Default values: the option is automatically enabled for the USA, but disabled by default for all other countries. |
| This option only applies to optiPoint 500, optiPoint 600 and OpenScape Personal Edition. |
9.6.5.3 |
Area: Member keys |
MULAP key set up |
| Offers the option to: |
| - | check whether a MULAP key has been created on the device or the console of the device, |
| - | delete or add a MULAP key. |
| The key is set up automatically when a MULAP is created. |
9.6.5.4 |
Close button |
| The Close button closes the dialog and returns you to the called dialog. It is only on this tab that any changes that were made can be actually applied. |
| |
| HiPath 3000/5000 V8, Manager E, Administrator Documentation, Issue 10 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3580M1000176A9 | 2011-01-24 |
