9.6.1 |
Call Pickup |
| Call pickupgroups can be created via Call pickup. When stations are collected into call pickup groups, a call to any member of the group is signaled to all members. However, the extension that is being called is the only station that will actually ring. The call is signaled to other members initially by a flashing LED next to the pickup key and, on display-model system telephones, by a display message. Then, if the call is not answered after a specified period of time, a tone sounds at all of the member stations. Provided the tone has not been deactivated via Settings | System Parameters | Flags with the Warning signal for call pickup groups option. |
9.6.1.1 |
Call pickup group |
| They are numbered Group 1, Group 2, Group 3, and so on. You select the group number by clicking on the number you want to use in the Call Pickup Group list. |
9.6.1.2 |
Selection and Members table |
| Selection contains the stations of the communication system. |
| Members contains the stations of the selected call pickup group. A station can only be a member of one call pickup group. |
| To assign a station to a call pickup group, select the relevant station in the Selection table and add it to the Member table with the -> button. The group membership is then displayed in the Group column of the Selection table. |
| To delete a station from a call pickup group, select the relevant station in the Member table and delete it with the <- button from the Member table. |
| |
| HiPath 3000/5000 V8, Manager E, Administrator Documentation, Issue 10 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3580M1000176A9 | 2011-01-24 |
