9.10  
Reset Activated Features 
 
Implementing features, see also Manager E Reset Activated Features

Definition  
Users can reset all of the features currently set on the telephones by entering a code.
The following features can be reset:
 •   Call forwarding (CF)
 •   Send/cancel messages
 •   Advisory message
 •   Group ringing
 •   Hunt group
 •   Station number suppression
 •   Silent camp-on
 •   Do not disturb
 •   Ringer cutoff
 •   Timed reminder
 •   Cancel all callbacks
The system can also reset the above features per telephone from a local or remote location using the HiPath 3000/5000 Manager E administration tool. The administrator first downloads the information to HiPath 3000/5000 Manager E and working off-line can selectively view the state of each of the features activated on each telephone. In HiPath 3000/5000 Manager E, the administrator can reset all these features on any telephone and upload the file to the HiPath 3000 system.
The following table illustrates the features that can be reset from the station by dialing the access code #0, individually.

 Station  
 HiPath 3000/5000 Manager E  
Call forwarding (CF)  
Call Forward on  
Received messages  
 
Advisory message  
Answer text  
Group ringing  
 
Leave Hunt Group  
Hunt group  
Station number suppression  
Suppress Calling ID  
Call waiting tone  
Call waiting tone  
Do Not Disturb  
Do Not Disturb  
Ringer cutoff  
Disable incoming ring  
The additional features in the HiPath 3000/5000 Manager E System Status - Flags screen: Room Monitor, Lock Code, Call Connection and Direct answering will not be deactivated.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Send messages  
You can also use "Reset all services" to delete received messages.  
Sensors/send messages  
A warning can be sent via a sensor to a station in the form of a text message (send message) and then reset by a different relay.  
Cancel all callbacks  
Access the procedure from "Reset all services".  

HiPath 3000/5000 V8, Feature Description, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580F100017618   2011-02-07