5.3.4  
Station Speed Dialing in System 
 

Definition  
The user can create a separate speed-dialing list for frequently dialed numbers.
Users can enter external numbers in the system database. Access depends on the station's dial-up access rights. Users must enter the trunk group code before the station number.
There is only one list of maximum 10 numbers per telephone. The HiPath 3000 systems have a pool of dial entries which is shared with the feature Repdial. The system does NOT dedicate 10 Station speed dial entries per telephone. Any unused entries remain in the entry pool and can be used by other stations. It is therefore possible that a station user may not be able to program an entry on the telephone even though not all entries in the list have been used. This could indicate that the system pool of entries has been fully used up.
All types of telephones have access to this feature.
Station speed-dial numbers are stored in the system but must be entered by the individual user from the telephone. System Administration cannot enter these numbers for a user. Only external calls can be stored. A name can be associated with each destination.
This feature cannot be invoked if Lock Code has been activated.
Use the Redial key or the pound (#) key to program a dial pause and a DTMF changeover function.
Station speed dial is constrained by the COS toll restriction rules.
The default access code is *7 followed by the index number. The abbreviated station speed-dial numbers are therefore: *7*0 through *7*9.
A feature button can be programmed on an optiPoint. The button simulates the dialing of the access code (*7). The user is then prompted (display telephone) to enter the index number. This is the same button used to dial the access code for System speed dial.
The trunk group code must be entered before the station number. Names cannot be assigned to Station speed dial numbers.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  
Max. no. of SSD entries per station  
 10  
Max. length of SDD entries  
 25 digits + trunk access code  
Max. no. of SSD entries in the system  
 2000  
 2000  
 300  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Telephones without displays  
Following station number entry, telephones without a display must wait for the confirmation tone.  
Analog telephones (with DP), S0 stations  
Station speed dialing is not possible.  
Internal station numbers, features  
You cannot store internal station numbers and features in the station speed-dialing list.  
optiPoint  
In the case of optiPoint telephones, users can store station speed dialing using codes or the telephone's programmable keys  
Repdial keys, station speed-dialing memory  
Station speed-dialing destinations can be assigned until station speed-dialing memory in the system is exhausted. Speed-dialing memory is used for both repdial keys and station speed-dialing destinations.  
Rotary dial analog telephones  
Station speed-dialing is not possible.  

HiPath 3000/5000 V8, Feature Description, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580F100017618   2011-02-07