2.18  
Call Forwarding After Time 
 

Definition  
The "Call forwarding after time" feature can be set for the individual extension via the user prompts on every terminal. External destinations and groups can also be entered.
Up to three call destination groups can be set for each station. A new indicator "**" has been added to call destination groups. This indicator shows whether a call forwarding destination is available for a particular station. In other words, "Call forwarding after time" is a call forwarding function.
If a call is not answered within the predefined period, the system calls the next destination (in this case, the second) in Call Management. The second (or first, third or fourth) destination can be either a call number (as in the past) or the new indicator "**". If this new indicator is configured, the system finds and calls the "Call forwarding after time" destination stored for the station. If a call number has not been stored here, the system moves on to the next destination.
The indicator "**" can also be entered as the first option.
The system permits you to do this, however, it is not recommended.  
Subscribers can configure a call forwarding destination via a terminal. Manager E cannot configure these destinations.
The "**" indicator is entered as the second call forwarding destination by default for all call destination lists. This ensures that all subscribers have the option of using this function. In the case of updated systems, a service technician must configure the "**" indicator in call destination lists if this feature is to be implemented in lower releases.
These numbers are not stored permanently. They are deleted when "Call forwarding after time" is deactivated.
If a station is busy, the system reacts in the same way as for normal call forwarding, that is, the system immediately switches to the next destination in the call destination list.  
The feature is supported externally by associated dialing and by DISA.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
MULAP  
If a user has configured a number of terminals in a MULAP, all terminals will respond in the same way when a call is forwarded.
 •   "Call forwarding after time" is not explicitly implemented for MULAPs or hunt groups. However, if "Call forwarding after time" is activated on one of the master terminals in a MULAP, it is also implemented when the MULAP is called.
 •   If the "Call forwarding after time" feature is activated on the master terminal in the MULAP, call forwarding is implemented on all terminals in the MULAP group.
 •   If "Call forwarding after time" is activated on another station in the MULAP, call forwarding is only implemented on this station.
Example: If a secretary wants to activate "Call forwarding after time" for the executive MULAP (which also includes the secretary telephone), this must be activated on the executive telephone.
 •   If a terminal is configured as a master in several MULAPs, the "Call forwarding after time" setting applies to all MULAPs.
Call forwarding after time for the U.S. (MULAP)  
A separate solution has been developed for MULAP in the U.S. The second field of the call destination list is left free to indicate that calls should only be forwarded when the line is busy.
Call forwarding  
Activating call forwarding does NOT override "Call forwarding after time". Calls are forwarded if the CFW destination is not answered within the predefined time.

HiPath 3000/5000 V8, Feature Description, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580F100017618   2011-02-07